View DG9424EDQ-T1-GE3_8990240.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

dg9424e, dg9425e, dg9426e www.vishay.com vishay siliconix s16-0320-rev. a, 29-feb-16 1 document number: 75770 for technical questions, contact: analogswitchtechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 1.6 ? on resistance, 5 v, +12 v, and +3 v quad spst switches description the dg9424e, dg9425e, dg9426e are monolithic quad single-pole-single-throw anal og switches. the g9424e and dg9425e differ only in that they respond to opposite logic levels. the dg9426e has two normally open and two normally closed switches. it can be given various configurations, including four spst, two spdt, and one dpdt. using bicmos wafer fabrication technology allows the dg9424e, dg9425e, and dg9426e to operate on single and dual supplies. single supply voltage ranges from 3 v to 16 v while dual supply oper ation is recommended with 3 v to 8 v. each switch conducts equally well in both direction when on, and blocks input voltages up to the supply levels when off. the low and flat on resistance over the full input signal voltage rang bring excellent lin earity, reduce insertion loss and signal distortion, make them ideal for data acquisition and programmable gain control applications. these switch characters also make them ideal fit for audio signal switch and reed relay replacement. the dg9424e, dg9425e, dg9426e feature low power dissipation, fast switching speed, and low voltage logic control threshold. proprietary design enables the low charge injection that minimize the switching transient. operation temperature is specified from -40 c to +85 c. the dg9424e, dg9425e, dg9426e are available in 16 lead tssop packages. features ? 3 v to 16 v single supply or 3 v thru 8 v dual supply operation ?1.6 ? typical on resistance ? 3 v logic compatible for control ? bi-directional rail to rail signal switching ? fast switching speed ? < 0.2 na switch on leakage ? break-before-make switching - dg9426 benefits ? wide operation voltage range ? low signal errors and distortion ?fast switching time ? simple interfacing applications ? automatic test equipment ? data acquisition systems ? meters and instruments ? medical and healthcare systems ? communication systems ? audio and video signal routing ? relay replacement ? battery powered systems ? computer peripherals ? audio and video signal routing ? functional block diagram and pin configuration 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 top view in 1 in 2 com 1 com 2 nc 1 /no 1 nc 2 /no 2 v- v+ gnd v l nc 4 /no 4 nc 3 /no 3 com 4 com 3 in 4 in 3 tssop dg9424e / dg9425e truth table logic dg9424e dg9425e 0offon 1onoff
dg9424e, dg9425e, dg9426e www.vishay.com vishay siliconix s16-0320-rev. a, 29-feb-16 2 document number: 75770 for technical questions, contact: analogswitchtechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 functional block diagram and pin configuration notes a. signals on nc, no, com or in exceeding v+ or v- will be clam ped by internal diodes. limit fo rward diode current to maximum cu rrent ratings. b. all leads welded or soldered to pc board. c. derate 7 mw/c above 25 c. ? stresses beyond those listed under absolute maximum ratings ma y cause permanent damage to th e device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those in dicated in the operational sectio ns of the specifications is not implied. exposure to absolute maximum rating conditions for extended pe riods may affect device reliability. 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 top view in 1 in 2 com 1 com 2 nc 1 no 2 v- v+ gnd v l nc 4 no 3 com 4 com 3 in 4 in 3 tssop dg9426e truth table logic sw 1 , sw 4 sw 2 , sw 3 0onoff 1offon ordering information temp. range package part number part marking std pack quantity -40 c to +85 c 16-pin tssop DG9424EDQ-T1-GE3 9424e tape and reel 3000 units dg9425edq-t1-ge3 9425e tape and reel 3000 units dg9426edq-t1-ge3 9426e tape and reel 3000 units absolute maximum ratings parameter limit unit v+ to v- -0.3 to +18 v gnd to v- 18 v l (gnd - 0.3) to (v+) + 0.3 in, com, nc, no a (v-) - 0.3 to (v+) + 0.3 continuous current (no, nc, com pins) 100 ma peak current, s or d (pul sed 1 ms, 10 % duty cycle) 200 storage temperature -65 to +150 c power dissipation (package) b 16-pin tssop c 450 mw thermal resistance b 178 c/w esd human body model (hbm); per ansi / esda / jedec ? js-001 >1500 v latch up current, per jesd78d 400 ma
dg9424e, dg9425e, dg9426e www.vishay.com vishay siliconix s16-0320-rev. a, 29-feb-16 3 document number: 75770 for technical questions, contact: analogswitchtechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 specifications a single supply 12 v parameter symbol test conditions unless otherwise specified v+ = 12 v, v- = 0 v v l = 5 v, v in = 2.4 v, 0.8 v f temp. b limits -40 c to +85 c unit min. d typ. c max. d analog switch analog signal range e v analog full 0 - 12 v on-resistance r on v+ = 10.8 v, v- = 0 v i no , i nc = 50 ma, v com = 2/9 v room - 1.6 3 ? full - - 4 digital control input current i inl or i inh full -1 0.01 1 a dynamic characteristics turn-on time e t on r l = 300 ? , c l = 35 pf v no , v nc = 5 v, see fig. 2 room - 36 51 ns full - - 65 turn-off time e t off room - 20 35 full - - 44 break-before-make time delay e t d dg9426e only, v no , v nc = 5 v r l = 300 ? , c l = 35 pf room 2 - - charge injection e q inj v g = 0 v, r g = 0 ? , c l = 1 nf room - 38 - pc off-isolation e oirr r l = 50 ? , c l = 5 pf f = 1 mhz room - -56 - db channel-to-channel crosstalk e x talk room - -77 - no, nc off capacitance e c no(off) f = 1 mhz room - 49 - pf c nc(off) com off capacitance e c com(off) room - 37 - channel on capacitance e c com(on) room - 89 - power supplies positive supply current i+ v in = 0 or v l room - 0.02 1 a full - - 5 negative suppl y current i- room -1 -0.002 - full -5 - - logic supply current i l room - 0.002 1 full - - 5 ground current i gnd room -1 -0.002 - full -5 - -
dg9424e, dg9425e, dg9426e www.vishay.com vishay siliconix s16-0320-rev. a, 29-feb-16 4 document number: 75770 for technical questions, contact: analogswitchtechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 specifications a dual supply 5 v parameter symbol test conditions unless otherwise specified v+ = 5 v, v- = 5 v v l = 5 v, v in = 2.4 v, 0.8 v f temp. b limits -40 c to +85 c unit min. d typ. c max. d analog switch analog signal range e v analog full -5 5 v on-resistance r on v+ = 4.5 v, v- = -4.5 v i no , i nc = 50 ma room - 1.9 3.3 ? full - - 4.3 switch off leakage current i no(off) v+ = 5.5 v, v- = -5.5 v v com = 4.5 v, v no , v nc = 4.5 v room -1 - 1 na i nc(off) full -10 - 10 i com(off) room -1 - 1 full -10 - 10 channel on leakage current i com(on) v+ = 5.5 v, v- = -5.5 v, v no , v nc = v com = 4.5 v room -1 - 1 full -10 - 10 digital control input current a i inl or i inh full -1 0.05 1 a dynamic characteristics turn-on time e t on r l = 300 ? , c l = 35 pf v no , v nc = 3.5 v, see fig. 2 room - 48 67 ns full - - 81 turn-off time e t off room - 34 57 full - - 67 break-before-make time delay e t d dg9426e only, v no , v nc = 3.5 v r l = 300 ? , c l = 35 pf room 2 - - charge injection e q inj v g = 0 v, r g = 0 ? , c l = 1 nf room - 112 - pc off isolation e oirr r l = 50 ? , c l = 5 pf, f = 1 mhz room - -56 - db channel-to-channel crosstalk e x talk room - -82 - source off capacitance e c no(off) c nc(off) f = 1 mhz room - 38 - pf drain off capacitance e c com(off) room - 38 - channel on capacitance e c com(on) room - 89 - power supplies positive supply current e i+ v in = 0 or v l room - 0.03 1 a full - - 5 negative supply current e i- room -1 -0.002 - full -5 - - logic supply current e i l room - 0.002 1 full - - 5 ground current e i gnd room -1 -0.002 - full -5 - -
dg9424e, dg9425e, dg9426e www.vishay.com vishay siliconix s16-0320-rev. a, 29-feb-16 5 document number: 75770 for technical questions, contact: analogswitchtechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 specifications a single supply 5 v parameter symbol test conditions unless otherwise specified v+ = 5 v, v- = 0 v v l = 5 v, v in = 2.4 v, 0.8 v f temp. b limits -40 c to +85 c unit min. d typ. c max. d analog switch analog signal range e v analog full - - 5 v on-resistance e r on v+ = 4.5 v, i no , i nc = 50 ma room - 3.1 4.8 ? full - - 5.8 dynamic characteristics turn-on time e t on r l = 300 ? , c l = 35 pf v no , v nc = 3.5 v, see fig. 2 room - 62 78 ns hot - - 106 turn-off time e t off room - 29 44 hot - - 56 break-before-make time delay e t d dg9426e only, v no , v nc = 3.5 v r l = 300 ? , c l = 35 pf room 5 - - charge injection e q inj v g = 0 v, r g = 0 ? , c l = 1 nf room - 10 - pc power supplies positive supply current e i+ v in = 0 or v l room - 0.02 1 a hot - - 5 negative supply current e i- room -1 -0.002 - hot -5 - - logic supply current e i l room - 0.002 1 hot - - 5 ground current e i gnd room -1 -0.002 - hot -5 - -
dg9424e, dg9425e, dg9426e www.vishay.com vishay siliconix s16-0320-rev. a, 29-feb-16 6 document number: 75770 for technical questions, contact: analogswitchtechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes a. leakage parameters are guaranteed by worst case te st conditions and not subj ect to production test. b. room = 25 c, full = as determined by the operating temperature suffix. c. typical values are for design aid only, not guaranteed nor subject to production testing. d. the algebraic convention whereby the most negative value is a mi nimum and the most positive a ma ximum, is used in this datash eet. e. guaranteed by design, not su bject to prod uction test. f. v in = input voltage to pe rform proper function. specifications a single supply 3 v parameter symbol test conditions unless otherwise specified v+ = 3 v, v- = 0 v v l = 3 v, v in = 2.4 v, 0.4 v f temp. b limits -40 c to +85 c unit min. d typ. c max. d analog switch analog signal range e v analog full 0 - 3 v on-resistance r on v+ = 2.7 v, v- = 0 v i no , i nc = 5 ma, v com = 0.5, 2.2 v room - 6 - ? full--- switch off leakage current a i no(off) v+ = 3.3 v, v- = 0 v v com = 0.3, 3 v, v no , v nc = 3, 0.3 v room -1 - 1 na i nc(off) full -10 - 10 i com(off) room -1 - 1 full -10 - 10 channel on leakage current a i com(on) v+ = 3.3 v, v- = 0 v, v no , v nc = v com = 0.3, 3 v room -1 - 1 full -10 - 10 digital control e input current i inl or i inh full -1 0.005 1 a dynamic characteristics turn-on time t on r l = 300 ? , c l = 35 pf v no , v nc = 1.5 v, see fig. 2 room - 140 - ns full - - 193 turn-off time t off room - 65 - full - - 89 break-before-make time delay t d dg9426e only, v no , v nc = 1.5 v r l = 300 ? , c l = 35 pf room 5 charge injection e q inj v g = 0 v, r g = 0 ? , c l = 1 nf room - 15 - pc off isolation e oirr r l = 50 ? , c l = 5 pf f = 1 mhz room - -56 - db channel-to-channel crosstalk e x talk room - -80 - source off capacitance e c no(off) f = 1 mhz room - 53 - pf c nc(off) drain off capacitance e c com(off) room - 42 - channel on capacitance e c com(on) room - 92 -
dg9424e, dg9425e, dg9426e www.vishay.com vishay siliconix s16-0320-rev. a, 29-feb-16 7 document number: 75770 for technical questions, contact: analogswitchtechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (25 c, unless otherwise noted) r on vs. v com and supply voltage r on vs. analog voltage and temperature switching time vs. temperature and single supply voltage r on vs. analog voltage and temperature switching time vs. temperature and dual supply voltage leakage current vs. analog voltage 0 1 2 3 4 5 6 7 8 9 10 0246810121416 r on - on-resistance ( ? ) v com - analog voltage (v) v+ = 2.7v, v- = 0v v+ = 4.5v, v- = 0v v+ = 7.2v, v- = 0v v+ = 10.8v, v- = 0v v+ = 14.4v, v- = 0v t a = 25 c i s = -1 ma 0 1 2 3 4 5 6 7 8 -5 -4 -3 -2 -1 0 1 2 3 4 5 r on - on-resistance ( ) v com - analog voltage (v) +85c v+ = 5 v is = 50 ma +25c -40c 0 30 60 90 120 150 180 -40-200 20406080100120 t on(en) , t off(en) - switching time (ns) temperature ( c) t on v+ = 3 v t on v+ = 5 v t off v+ = 3 v t on v+ = 12 v t off v+ = 5 v t off v+ = 12 v 0 2 4 6 8 10 12 0123 r on - on-resistance ( ? ) v com - analog voltage (v) +85 c +25 c -40 c v+/- = 2.7/0 v i s = 50 ma 0 10 20 30 40 50 60 70 80 90 100 110 120 -60 -40 -20 0 20 40 60 80 100 120 140 t on(en) , t off(en) - switching time (ns) temperature ( c) t on vs = -3.5 v t on vs = +3.5 v t off vs = -3.5 v t off vs = +3.5 v v supply = 5 v -200.0 -150.0 -100.0 -50.0 0 50.0 100.0 150.0 200.0 -5 -4 -3 -2 -1 0 1 2 3 4 5 leakage current (pa) v com, v no, v nc - analog voltage (v) v+ = 5 v v- = -5 v
dg9424e, dg9425e, dg9426e www.vishay.com vishay siliconix s16-0320-rev. a, 29-feb-16 8 document number: 75770 for technical questions, contact: analogswitchtechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (25 c, unless otherwise noted) leakage current vs. temperature switching current vs. input switching frequency switching threshold vs. supply voltage insertion loss, off isolation and crosstalk vs. frequency 1 10 100 1,000 10,000 100,000 -60 -40 -20 0 20 40 60 80 100 120 140 leakage current (pa) temperature ( c) v+ = +5.5 v v- = -5.5 v i d(off) i d(on) i s(off) 0.001 0.01 0.1 1 10 100 1000 10000 100000 10 100 1000 10k 100k 1m 10m i+ - supply current (a) input switching frequency (hz) v+ = +5 v v- = -5 v 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 2468101214 v t - switching threshold (v) v+ - supply voltage (v) -40 c to +85 c v l = v+ v inh v inl -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 100k 1m 10m 100m 1g loss, oirr, x talk (db) frequency (hz) insertion loss v+ = 3 v v- = 0 v r l = 50 off isolation crosstalk
dg9424e, dg9425e, dg9426e www.vishay.com vishay siliconix s16-0320-rev. a, 29-feb-16 9 document number: 75770 for technical questions, contact: analogswitchtechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 schematic diagram (typical channel) fig. 1 test circuits fig. 2 - switching time fig. 3 - break-before-make (dg9426e) level shift/ drive v in v l s v+ gnd v- d logic input switch output 50 % 0 v switch v out t r < 5 ns t f < 5 ns 90 % t off t on note: logic input waveform is inverted for switches that have the opposite logic sense control c l (includes fixture and stray capacitance) v+ in r l r l + r on v out = v in v- gnd v l c l 35 pf v- r l 300 v l v+ v in no or nc com v out v inh v inl 0.9 x v out 0 v logic input switch switch output 3 v 50 % 0 v output 0 v 90 % v o2 v o1 90 % v in1 v in2 t d t d v o2 c l (includes fixture and stray capacitance) v+ nc 2 v- no 1 v l v in2 in 2 com 2 v in1 r l2 300 com 1 v o1 c l2 35 pf gnd r l1 300 c l1 35 pf in 1 v-
dg9424e, dg9425e, dg9426e www.vishay.com vishay siliconix s16-0320-rev. a, 29-feb-16 10 document number: 75770 for technical questions, contact: analogswitchtechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 test circuits fig. 4 - charge injection fig. 5 - crosstalk fig. 6 - off-isolation fig. 7 - source/drain capacitances vishay siliconix maintains worldw ide manufacturing ca pability. products may be manufactured at one of several qualified locatio ns. reliability da ta for silicon technology and package reliability represent a composite of all qu alified locations. for related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?75770 . c l 10 nf no or nc r g v out v+ com v- in v l v g gnd off on off off on off v o v o in x in x q = v o x c l in x dependent on switch configuration input polarity determined by sense of switch. v- v+ v l v in = 0 - v+ 0 v, 2.4 v no 1 x talk isolation = 20 log v out v in com 2 c = rf b yp ass r l com 1 no 2 v s 0 v, 2.4 v in 1 50 v out in 2 r g = 50 v l v+ gnd v - nc c cc v+ v- v l r l 50 com 0 v, 2.4 v v+ r g = 50 gnd v- c v in off isolation = 20 log v out v in in v l v out c no or nc c c = rf bypass v- v+ v l no or nc in com v l v+ gnd v - c 0 v, 2.4 v meter hp4192a impedance analyzer or equivalent cc v lv+ v-
vishay siliconix package information document number: 74417 23-oct-06 www.vishay.com 1 symbols dimensions in millimeters min nom max a - 1.10 1.20 a1 0.05 0.10 0.15 a2 - 1.00 1.05 b 0.22 0.28 0.38 c - 0.127 - d 4.90 5.00 5.10 e 6.10 6.40 6.70 e1 4.30 4.40 4.50 e-0.65- l 0.50 0.60 0.70 l1 0.90 1.00 1.10 y--0.10 1036 ecn: s-61920-rev. d, 23-oct-06 dwg: 5624 tssop: 16-lead
pad pattern www.vishay.com vishay siliconix revision: 02-sep-11 1 document number: 63550 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 recommended minimum pad for tssop-16 0.281 (7.15) recommended minimum pads dimensions in inches (mm) 0.171 (4.35) 0.055 (1.40) 0.012 (0.30) 0.026 (0.65) 0.014 (0.35) 0.193 (4.90)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of DG9424EDQ-T1-GE3

	To Download DG9424EDQ-T1-GE3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .